0.1.0 - ci-build
VPImplementationGuide - Local Development build (v0.1.0). See the Directory of published versions
| Active as of 2022-08-23 |
Definitions for the vp-vaccination-dose-base-extension extension.
| 1. Extension | |
| Definition | An Extension |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 3. Extension.extension | |
| Definition | An Extension |
| Control | 2..* |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 4. Extension.extension:doseQuantity | |
| SliceName | doseQuantity |
| Definition | An Extension |
| Control | 1..1 |
| Type | Extension |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 5. Extension.extension:doseQuantity.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 6. Extension.extension:doseQuantity.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 7. Extension.extension:doseQuantity.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | doseQuantity |
| 8. Extension.extension:doseQuantity.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 1..1 |
| Type | Quantity |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 9. Extension.extension:doseQuantity.value[x].id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 10. Extension.extension:doseQuantity.value[x].extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..* |
| Type | Extension |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 11. Extension.extension:doseQuantity.value[x].value | |
| Definition | The value of the measured amount. The value includes an implicit precision in the presentation of the value. |
| Control | 1..1 |
| Type | decimal |
| Must Support | true |
| Requirements | Precision is handled implicitly in almost all cases of measurement. |
| Comments | The implicit precision in the value should always be honored. Monetary values have their own rules for handling precision (refer to standard accounting text books). |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:doseQuantity.value[x].comparator | |
| Definition | How the value should be understood and represented - whether the actual value is greater or less than the stated value due to measurement issues; e.g. if the comparator is "<" , then the real value is < stated value. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from QuantityComparator How the Quantity should be understood and represented. |
| Type | code |
| Is Modifier | true |
| Requirements | Need a framework for handling measures where the value is <5ug/L or >400mg/L due to the limitations of measuring methodology. |
| Meaning if Missing | If there is no comparator, then there is no modification of the value |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 13. Extension.extension:doseQuantity.value[x].unit | |
| Definition | A human-readable form of the unit. |
| Control | 0..1 |
| Type | string |
| Requirements | There are many representations for units of measure and in many contexts, particular representations are fixed and required. I.e. mcg for micrograms. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 14. Extension.extension:doseQuantity.value[x].system | |
| Definition | The identification of the system that provides the coded form of the unit. |
| Control | 1..1 This element is affected by the following invariants: qty-3 |
| Type | uri |
| Must Support | true |
| Requirements | Need to know the system that defines the coded form of the unit. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 15. Extension.extension:doseQuantity.value[x].code | |
| Definition | A computer processable form of the unit in some unit representation system. |
| Control | 1..1 |
| Binding | The codes SHALL be taken from UCUMCodes |
| Type | code |
| Must Support | true |
| Requirements | Need a computable form of the unit that is fixed across all forms. UCUM provides this for quantities, but SNOMED CT provides many units of interest. |
| Comments | The preferred system is UCUM, but SNOMED CT can also be used (for customary units) or ISO 4217 for currency. The context of use may additionally require a code from a particular system. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:isProtected | |
| SliceName | isProtected |
| Definition | An Extension |
| Control | 1..1 |
| Type | Extension |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 17. Extension.extension:isProtected.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 18. Extension.extension:isProtected.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 19. Extension.extension:isProtected.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | isProtected |
| 20. Extension.extension:isProtected.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 1..1 |
| Type | boolean |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 21. Extension.extension:notes | |
| SliceName | notes |
| Definition | An Extension |
| Control | 0..1 |
| Type | Extension |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 22. Extension.extension:notes.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| 23. Extension.extension:notes.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 24. Extension.extension:notes.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | notes |
| 25. Extension.extension:notes.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 1..1 |
| Type | markdown |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Must Support | true |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 26. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | https://fhir-vaccination-pass.github.io/fhir-implementation-guide/StructureDefinition/vp-vaccination-dose-base-extension |
| 27. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |